Two used Tri - Fins, 6'0" and 5'11", $75 and $100 - Santa Barbara Surfer

Drakonis_Surf · 01-31-2010, 09:24 PM

Also for sale are two used tri - fins:

1) 6’0” x 19” x 2 1/8” squash tail. This board was shaped from polyurethane foam and glassed using epoxy resin. The fin system is Futures and a set of new Vector II (F4 437 template) composite fins are included. The board has had some ding repairs but everything is water tight and the board is ready for the water. No delams or soft spots, just your average pressure dents. This is a great all – around shape for SB.

2) 5’11” x 19 3/4” x 2 1/16” round - pin. This board was a bit of an experiment as it has thin agave wood rails surrounding the polyurethane core. The board was glassed using epoxy resin. It is a bit on the small side for me (5’11”/185 lbs) but would be great for a smaller surfer or kid wanting to try something a little different. It would also be a good first shortboard for a small kid. For bigger surfers this board is super responsive and works best on steeper waves. The fin system is Futures and a set of Rainbow Fin Co. fins (R4 4.25” template) fiberglass fins are included. The board has a couple of dings that have been repaired and is in otherwise great condition.

Drakonis_Surf · 01-31-2010, 09:25 PM

Pics of the 6'0":

Drakonis_Surf · 01-31-2010, 09:26 PM

Pics of the 5'11":

01-31-2010, 09:24 PM	#1
Drakonis_Surf Local Join Date: Nov 2009 Posts: 7	Two used Tri - Fins, 6'0" and 5'11", $75 and $100 Also for sale are two used tri - fins: 1) 6’0” x 19” x 2 1/8” squash tail. This board was shaped from polyurethane foam and glassed using epoxy resin. The fin system is Futures and a set of new Vector II (F4 437 template) composite fins are included. The board has had some ding repairs but everything is water tight and the board is ready for the water. No delams or soft spots, just your average pressure dents. This is a great all – around shape for SB. 2) 5’11” x 19 3/4” x 2 1/16” round - pin. This board was a bit of an experiment as it has thin agave wood rails surrounding the polyurethane core. The board was glassed using epoxy resin. It is a bit on the small side for me (5’11”/185 lbs) but would be great for a smaller surfer or kid wanting to try something a little different. It would also be a good first shortboard for a small kid. For bigger surfers this board is super responsive and works best on steeper waves. The fin system is Futures and a set of Rainbow Fin Co. fins (R4 4.25” template) fiberglass fins are included. The board has a couple of dings that have been repaired and is in otherwise great condition.

01-31-2010, 09:25 PM	#2
Drakonis_Surf Local Join Date: Nov 2009 Posts: 7	Pics of the 6'0": Attached Thumbnails

01-31-2010, 09:26 PM	#3
Drakonis_Surf Local Join Date: Nov 2009 Posts: 7	Pics of the 5'11": Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode